师资队伍(旧)

王兴盛

来源: 日期:2020-11-15 点击数:

王兴盛

性别

副教授

系别

机械设计与制造系

博士/硕导



E-mail

xingshengwang@njau.edu.cn

单位地址

南京市浦口区点将台路40号

邮编

210031

研究领域

激光微纳加工、微纳仿生制造及传感应用、机电一体化

社会兼职

中国微米纳米技术协会高级会员

承担项目

1.国家自然科学基金青年基金项目:磁场辅助的皮秒激光诱导液体等离子体表面微织构加工技术及其机理研究(51705258),2018.01-2020.12,主持。

2.江苏省自然科学基金青年基金项目:基于皮秒激光的医学用针表面微纳复合结构直写加工技术研究(BK20150685),2015.07-2018.06,主持。

3.中央高校基本科研业务费:磁场辅助的皮秒激光诱导液体等离子体表面微织构加工技术及其机理研究(KJQN201843),2018.01-2020.12,主持。

4.中央高校基本科研业务费:水田足式机器人触土部件磁控激光诱导等离子体微加工研究(KYZ201659),2016.01-2018.12,主持。

5.南京农业大学工学院优秀青年人才科技基金:磁控激光诱导液体等离子微加工研究(YQ201604),2016.07-2019.06,主持。

6.南京农业大学科研启动基金:激光诱导液体等离子微加工研究(rcqd16-05),2016.09-2019.9,主持。

学术成果

近期主要论文:

1. Juncheng Lu,Xingsheng Wang*, Yuke Huang, Caiyin Zhou, Bin Xu, Xiuqing Fu. Fabrication and cutting performance of bionic micro-serrated scalpels based on the miscanthus leaves. Tribology International, 2020, 145: 106162.

2. Xingsheng Wang*, Yuke Huang, Xinwei Wang, Bin Xu, Jun Feng, Bo Shen. Experimental investigation and optimization of laser induced plasma micromachining using flowing water. Optics & Laser Technology, 2020, 127, 106250.

3. Xingsheng Wang*, Yuke Huang, Chengyu Li, Bin Xu. Numerical simulation and experimental study on picosecond laser ablation of stainless steel. Optics & Laser Technology, 2020, 126, 106067.

4. Youqiang Xing, Ze Wu, Junjie Yang,Xingsheng Wang*, Lei Liu*. LIPSS combined with ALD MoS2 nano-coatings for enhancing surface friction and hydrophobic performances. Surface and Coatings Technology, 2020,385:125396.

5. Caiying Zhou, Juncheng Lu,Xingsheng Wang*.Adhesion behavior of textured electrosurgical electrode in an electric cutting process. Coatings, 2020, 10, 596.

6. 王兴盛*,黄宇珂,沈博,徐斌,章剑,缪洁良.短/超短脉冲激光诱导等离子体微加工研究进展.激光与光电子学进展, 2020, 57, 111405.

7. Xingsheng Wang*, Bin Xu, Yunfu Chen, Chenbin Ma, Yuke Huang.Fabrication of micro/nano-hierarchical structures for droplet manipulation via velocity-controlled picosecond laser surface texturing. Optics and Lasers in Engineering Technology, 2019, 122, 319-327.

8. Xingsheng Wang*, Yuke Huang, Bin Xu, Youqiang Xing, Min Kang. Comparative assessment of picosecond laser induced plasma micromachining using still and flowing water. Optics & Laser Technology, 2019, 119, 105623.

9. Xingsheng Wang*, Yuke Huang, Youqiang Xing, Xiuqing Fu, Zhengwei Zhang, Chenbin Ma. Fabrication of micro-channels on Al2O3/TiC ceramics using picosecond laser induced plasma micromachining. Journal of Manufacturing Processes, 2019, 44, 102-112.

10. Xingsheng Wang*, Bin Xu, Yuke Huang, Jian Zhang, Qi Liu.Laser induced forward transfer of silver nanoparticle ink using burst technique. Applied Physics A: Materials Science & Processing, 2019, 125:845.

11. Juncheng Lu,Xingsheng Wang*, Chenbin Ma, Chengyu Li, Shengliang Tian. Influence of blended textures generated by laser surface texturing on friction behavior in soft tissue cutting. Tribology International, 2019, 134: 1-6.

12. Chenbin Ma, Min Kang*, Xingsheng Wang*, Ninghui Li, Wei Hong, Chenyu Li, An Yang. Fabrication of regular hierarchical structures with superhydrophobic and high adhesion performances on a 304 stainless steel surface via picosecond laser. Journal of Bionic Engineering, 2019, 16(5), 806-813.

13. Xingsheng Wang, Chenbin Ma, Chengyu Li, Min Kang, Kornel Ehmann.Influence of pulse energy on machining characteristics in laser induced plasma micro-machining. Journal of Materials Processing Technology, 2018, 262: 85-94.

14. Xingsheng Wang, Chengyu Li, Wei Hong, Chenbin Ma, Youqiang Xing, Jun Feng. Fabrication of ordered hierarchical structures on stainless steel by picosecond laser for modified wettability applications. Optics Express, 2018, 26(15):18998-19008.

15. Xingsheng Wang, Chengyu Li, Chenbin Ma, Jun Feng, Wei Hong, Zhengwei Zhang. Formation of laser induced periodic structures on stainless steel using multi-burst picosecond pulses. Optics Express, 2018, 26(5):6325-6330.

16. Ninhui Li, Lingqian Mou, Zewen Li, Min Kang,Xingsheng Wang. Evolution of surface topography of 304L stainless steel irradiated by long pulse laser. AIP Advances, 2018, 8(7), 075211.

17. Marco Giovannini,Xingsheng Wang, Jian Cao, Kornel Ehmann. Vibration-assisted slicing of soft tissue for biopsy procedures. ASME-Journal of Medical Devices, 2018, doi:10.1115/1.4040635.

18. Youqiang Xing, Lei Liu, Xiuqing Hao, Ze Wu, Peng Huang,Xingsheng Wang. Micro-channels machining on polycrystalline diamond by nanosecond laser. Optics & Laser Technology, 2018, 108: 333-345.

19. Jun Yang,Xingsheng Wang, Min Kang. Finite element simulation of surface roughness in diamond turning of spherical surfaces. Journal of Manufacturing Processes, 2018, 31: 768-775.

20. Xingsheng Wang, Yongnian Zhang, Ling Wang, Jieyu Xian, Meifu Jin, Min Kang. Fabrication of micro-convex domes using long pulse laser. Applied Physics A: Materials Science & Processing, 2017, 123(51):1-9.

21. Xingsheng Wang, Peidong Han, Marco Giovannini, Kornel Ehmann. Modeling of machined depth in laser surface texturing of medical needles. Precision Engineering, 2017, 47:10-18.

22. Xingsheng Wang, Jieyu Xian, Yong Yang, Yongnian Zhang, Xiuqing Fu, Min Kang. Use of coordinate measuring machine to measure circular aperture complex optical surface. Measurement, 2017, 100:1-6.

23. Xingsheng Wang, Weiteng Xu, Ling Wang, Lu Liu, Zhengwei Zhang, Meifu Jin, Min Kang. Magnetic-field-assisted fabrication of micro-convex domes using long pulse laser. Applied Physics A: Materials Science & Processing, 2017, 123(592):1-9.

24. Marco Giovannini, Huaqing Ren,Xingsheng Wang, Kornel Ehmann. Tissue cutting with micro-serrated biopsy punches. Journal of Micro and Nano-Manufacturing, 2017, 5(4), 041004.

25. Xu Chen, Min Kang,Xingsheng Wang, Muhammad Hassan, Jun Yang. Tool path optimal design for slow tool servo turning of complex optical surface. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 2017, 231(5): 825-837 .

26. Xingsheng Wang, Min Kang, Xiuqing Fu, Li Chunlin. Predictive modeling of surface roughness in lenses precision turning using regression and support vector machines. The International Journal of Advanced Manufacturing Technology, 2016, 87:1273-1281.

27. Xingsheng Wang, Peidong Han, Min Kang, Kornel Ehmann. Surface-blended texturing of medical needles for friction reduction using a picosecond laser. Applied Physics A: Materials Science & Processing, 2016, 122(286):1-9.

28. Youqiang Xing, Jianxin Deng,Xingsheng Wang, Kornel Ehmann. Experimental assessment of laser textured cutting tools in dry cutting of aluminum alloys. ASME- Journal of Manufacturing Science and Engineering, 2016, 138(7):071006 .

29. Xingsheng Wang, Marco Giovannini, Youqiang Xing, Min Kang, Kornel Ehmann. Fabrication and tribological behaviors of corner-cube-like dimple arrays produced by laser surface texturing on medical needles. Tribology International, 2015, 92:553-558.

30. Xingsheng Wang, Youqiang Xing, Marco Giovannini. Effect of overlap and overscan number in laser surface texturing of medical needles. Applied Physics A: Materials Science & Processing, 2015, 120(1):229-238.

31. Xingsheng Wang, Xiuqing Fu, Chunlin Li, Min Kang. Tool path generation for slow tool servo turning of complex optical surfaces. The International Journal of Advanced Manufacturing Technology, 2015, 79(1-4):437-448.

32. Youqiang Xing, Jianxin Deng,Xingsheng Wang, Rong Meng. Effect of laser surface textures combined with multi-solid lubricant coatings on the tribological properties of Al2O3/TiC ceramic. Wear, 2015, 342-343:1-12.

33. Youqiang Xing, Jianxin Deng, Kedong Zhang,Xingsheng Wang, Yunsong Lian, Yonghui Zhou. Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings. Ceramic International, 2015, 41(8):10261-10271.

34. Marco Giovannini, Newell Moser, Xingsheng Wang, Kornel Ehmann. Computational and experimental study of vibrational motions on tissue cutting for solid biopsy needles. Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference MSEC 2015, 08/6-12/6, 2015.

授权专利:

1. 王兴盛, 章剑,徐斌.一种激光转移打印氧化石墨烯湿度传感器的制备方法.发明专利, 2019109142250, 2019. 实质审查

2. 王兴盛, 徐斌,章剑.一种多材料激光诱导向前转移3D打印装置及方法.发明专利, 201910914386X, 2019. 实质审查

3. 王兴盛, 黄宇珂,徐斌.基于流动水层的激光诱导液体等离子体微加工的方法及装置.发明专利, 2019104092645, 2019. 实质审查

4. 王兴盛, 马晨斌,李成玉,康敏. 一种表面具有微纳复合抗菌织构的医学用针及其制备方法.发明专利, 2018100812125, 2018. 实质审查

5. 王兴盛, 徐斌,缪洁良,章剑, 黄宇珂.一种用于激光诱导向前转移技术的装夹装置.实用新型, ZL2019216105868, 2020.

6. 王兴盛, 章剑,沈博,黄宇珂, 徐斌.一种基于扫描振镜的五轴激光微加工装置.实用新型, ZL2019216105887, 2020.

7. 王兴盛, 沈博,缪洁良,章剑, 黄宇珂.一种激光辅助微铣削加工装置.实用新型, ZL2019216103171, 2020.

8. 王兴盛, 卢军成,周彩莹,章剑, 沈博.一种手术刀切割实验装置.实用新型, ZL2019216103190, 2020.

9. 王兴盛, 洪伟,马晨斌,康敏. 一种具有CCD快速聚焦的表面微加工装置.实用新型, ZL2018201414309, 2019.

10. 王兴盛, 马晨斌,李成玉,康敏. 一种医学用针横向穿刺的力测量装置.实用新型, ZL2018207516715, 2018.

11. 王兴盛,康敏, 傅秀清,杨勇,鲜洁宇. 一种表面具有微反射器结构的医学用针.实用新型, ZL2015203506867, 2015.

奖励荣誉

1. 2019年南京农业大学钟山学术新秀

2. 2019年江苏省青年科技人才托举工程

3. 2016年江苏省科技副总(企业创新岗)

4. 2015年工学院钟山学术新秀培育计划

Name

Xingsheng Wang

Gender

Male

Title

Associate Professor

Department

Mechanical Engineering

Degree

Ph.D.



E-mail

xingshengwang@njau.edu.cn

Unit address

40 Dianjiangtai Road, Pukou District, Nanjing, Jiangsu

Post code

210031

Research field

Laser Micromachining, Micro-nano Bionic Manufacturing, Microsensor, Mechatronics

Social appointments

Chinese Society of Micro-nano Technology Senior member

Research projects

1. National Natural Science Foundation of China, Study on the technology and mechanism of magnetic field assisted picosecond laser induced liquid plasma surface texturing (51705258), 2018.01-2020.12.

2. Natural Science Foundation of Jiangsu Province, Fabrication and performance characterization of micro/nano hierarchical structures on medical needles by direct laser writing (BK20150685), 2015.07-2018.06.

3. Fundamental Research Funds for the Central Universities, Study on the technology and mechanism of magnetic field assisted picosecond laser induced liquid plasma surface texturing (KJQN201843), 2018.01-2020.12.

4. Fundamental Research Funds for the Central Universities, Magnetic assisted laser induced liquid plasma micro machining (KYZ201659), 2016.01-2018.12.

5. Foundation for Distinguished Young Talents, College of Engineering, Nanjing Agricultural University, Research on magnetic control laser induced plasma micromachining (YQ201604), 2016.07-2019.06.

6. Young Teachers Fund of Nanjing Agricultural University, Research on laser induced plasma micromachining (rcqd16-05), 2016.09-2019.09.

Academic achievements

Recent Papers:

1. Juncheng Lu,Xingsheng Wang*, Yuke Huang, Caiyin Zhou, Bin Xu, Xiuqing Fu. Fabrication and cutting performance of bionic micro-serrated scalpels based on the miscanthus leaves. Tribology International, 2020, 145: 106162.

2. Xingsheng Wang*, Yuke Huang, Xinwei Wang, Bin Xu, Jun Feng, Bo Shen. Experimental investigation and optimization of laser induced plasma micromachining using flowing water. Optics & Laser Technology, 2020, 127, 106250.

3. Xingsheng Wang*, Yuke Huang, Chengyu Li, Bin Xu. Numerical simulation and experimental study on picosecond laser ablation of stainless steel. Optics & Laser Technology, 2020, 126, 106067.

4. Youqiang Xing, Ze Wu, Junjie Yang,Xingsheng Wang*, Lei Liu*. LIPSS combined with ALD MoS2nano-coatings for enhancing surface friction and hydrophobic performances. Surface and Coatings Technology, 2020,385:125396.

5. Caiying Zhou, Juncheng Lu,Xingsheng Wang*.Adhesion behavior of textured electrosurgical electrode in an electric cutting process. Coatings, 2020, 10, 596.

6. Xingsheng Wang*, Bin Xu, Yunfu Chen, Chenbin Ma, Yuke Huang.Fabrication of micro/nano-hierarchical structures for droplet manipulation via velocity-controlled picosecond laser surface texturing. Optics and Lasers in Engineering Technology, 2019, 122, 319-327.

7. Xingsheng Wang*, Yuke Huang, Bin Xu, Youqiang Xing, Min Kang. Comparative assessment of picosecond laser induced plasma micromachining using still and flowing water. Optics & Laser Technology, 2019, 119, 105623.

8. Xingsheng Wang*, Yuke Huang, Youqiang Xing, Xiuqing Fu, Zhengwei Zhang, Chenbin Ma. Fabrication of micro-channels on Al2O3/TiC ceramics using picosecond laser induced plasma micromachining. Journal of Manufacturing Processes, 2019, 44, 102-112.

9. Xingsheng Wang*, Bin Xu, Yuke Huang, Jian Zhang, Qi Liu.Laser induced forward transfer of silver nanoparticle ink using burst technique. Applied Physics A: Materials Science & Processing, 2019, 125:845.

10. Juncheng Lu,Xingsheng Wang*, Chenbin Ma, Chengyu Li, Shengliang Tian. Influence of blended textures generated by laser surface texturing on friction behavior in soft tissue cutting. Tribology International, 2019, 134: 1-6.

11. Chenbin Ma, Min Kang*,Xingsheng Wang*, Ninghui Li, Wei Hong, Chenyu Li, An Yang. Fabrication of regular hierarchical structures with superhydrophobic and high adhesion performances on a 304 stainless steel surface via picosecond laser. Journal of Bionic Engineering, 2019, 16(5), 806-813.

12. Xingsheng Wang, Chenbin Ma, Chengyu Li, Min Kang, Kornel Ehmann.Influence of pulse energy on machining characteristics in laser induced plasma micro-machining. Journal of Materials Processing Technology, 2018, 262: 85-94.

13. Xingsheng Wang, Chengyu Li, Wei Hong, Chenbin Ma, Youqiang Xing, Jun Feng. Fabrication of ordered hierarchical structures on stainless steel by picosecond laser for modified wettability applications. Optics Express, 2018, 26(15):18998-19008.

14. Xingsheng Wang, Chengyu Li, Chenbin Ma, Jun Feng, Wei Hong, Zhengwei Zhang. Formation of laser induced periodic structures on stainless steel using multi-burst picosecond pulses. Optics Express, 2018, 26(5):6325-6330.

15. Ninhui Li, Lingqian Mou, Zewen Li, Min Kang,Xingsheng Wang. Evolution of surface topography of 304L stainless steel irradiated by long pulse laser. AIP Advances, 2018, 8(7), 075211.

16. Marco Giovannini,Xingsheng Wang, Jian Cao, Kornel Ehmann. Vibration-assisted slicing of soft tissue for biopsy procedures. ASME-Journal of Medical Devices, 2018, doi:10.1115/1.4040635.

17. Youqiang Xing, Lei Liu, Xiuqing Hao, Ze Wu, Peng Huang,Xingsheng Wang. Micro-channels machining on polycrystalline diamond by nanosecond laser. Optics & Laser Technology, 2018, 108: 333-345.

18. Jun Yang,Xingsheng Wang, Min Kang. Finite element simulation of surface roughness in diamond turning of spherical surfaces. Journal of Manufacturing Processes, 2018, 31: 768-775.

19. Xingsheng Wang, Yongnian Zhang, Ling Wang, Jieyu Xian, Meifu Jin, Min Kang. Fabrication of micro-convex domes using long pulse laser. Applied Physics A: Materials Science & Processing, 2017, 123(51):1-9.

20. Xingsheng Wang, Peidong Han, Marco Giovannini, Kornel Ehmann. Modeling of machined depth in laser surface texturing of medical needles. Precision Engineering, 2017, 47:10-18.

21. Xingsheng Wang, Jieyu Xian, Yong Yang, Yongnian Zhang, Xiuqing Fu, Min Kang. Use of coordinate measuring machine to measure circular aperture complex optical surface. Measurement, 2017, 100:1-6.

22. Xingsheng Wang, Weiteng Xu, Ling Wang, Lu Liu, Zhengwei Zhang, Meifu Jin, Min Kang. Magnetic-field-assisted fabrication of micro-convex domes using long pulse laser. Applied Physics A: Materials Science & Processing, 2017, 123(592):1-9.

23. Marco Giovannini, Huaqing Ren,Xingsheng Wang, Kornel Ehmann. Tissue cutting with micro-serrated biopsy punches. Journal of Micro and Nano-Manufacturing, 2017, 5(4), 041004.

24. Xu Chen, Min Kang,Xingsheng Wang, Muhammad Hassan, Jun Yang. Tool path optimal design for slow tool servo turning of complex optical surface. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 2017, 231(5): 825-837 .

25. Xingsheng Wang, Min Kang, Xiuqing Fu, Li Chunlin. Predictive modeling of surface roughness in lenses precision turning using regression and support vector machines. The International Journal of Advanced Manufacturing Technology, 2016, 87:1273-1281.

26. Xingsheng Wang, Peidong Han, Min Kang, Kornel Ehmann. Surface-blended texturing of medical needles for friction reduction using a picosecond laser. Applied Physics A: Materials Science & Processing, 2016, 122(286):1-9.

27. Youqiang Xing, Jianxin Deng,Xingsheng Wang, Kornel Ehmann. Experimental assessment of laser textured cutting tools in dry cutting of aluminum alloys. ASME- Journal of Manufacturing Science and Engineering, 2016, 138(7):071006 .

28. Xingsheng Wang, Marco Giovannini, Youqiang Xing, Min Kang, Kornel Ehmann. Fabrication and tribological behaviors of corner-cube-like dimple arrays produced by laser surface texturing on medical needles. Tribology International, 2015, 92:553-558.

29. Xingsheng Wang, Youqiang Xing, Marco Giovannini. Effect of overlap and overscan number in laser surface texturing of medical needles. Applied Physics A: Materials Science & Processing, 2015, 120(1):229-238.

30. Xingsheng Wang, Xiuqing Fu, Chunlin Li, Min Kang. Tool path generation for slow tool servo turning of complex optical surfaces. The International Journal of Advanced Manufacturing Technology, 2015, 79(1-4):437-448.

31. Youqiang Xing, Jianxin Deng,Xingsheng Wang, Rong Meng. Effect of laser surface textures combined with multi-solid lubricant coatings on the tribological properties of Al2O3/TiC ceramic. Wear, 2015, 342-343:1-12.

32. Youqiang Xing, Jianxin Deng, Kedong Zhang,Xingsheng Wang, Yunsong Lian, Yonghui Zhou. Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings. Ceramic International, 2015, 41(8):10261-10271.

33. Marco Giovannini, Newell Moser, Xingsheng Wang, Kornel Ehmann. Computational and experimental study of vibrational motions on tissue cutting for solid biopsy needles. Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference MSEC 2015, 08/6-12/6, 2015.

Reward & honor

2019, Zhongshan Academic Rookie, Nanjing Agricultural University.

2019, Jiangsu Province Young Science and Technology Talent Support Project

版权所有:南京农业大学工学院

地址:江苏省南京市浦口区点将台路40号

邮编:210031      邮箱:coe@njau.edu.cn     

苏ICP备11055736号-3